SENAO 3054 PCI Aries User Manual page 11

5. If you find the yellow (?) sign on the adapter or the above message is not displayed, it shows
that the drivers for this device were not installed or the wireless LAN PCI Card is not operating
properly. Uninstall and re-install the driver, referring to Chapter 2-4 Uninstalling Driver and
Utility.
2-3 IEEE 802.11 WLAN NIC Client Utility
Use the 802.11 NIC Client Utility to configure the device driver. Access the Utility by clicking the
Start button and selecting Programs > IEEE 802.11 > 802.11 WLAN NIC Utility. The 802.11 NIC
Client Utility system tray icon is displayed in the bottom right and t he taskbar. Launch the 802.11
NIC Client Utility by double-clicking the tray icon, or by right-clicking the tray icon and selecting
Open Client Utility ...
The 802.11 NIC Client Utility is used to display or change the PCI Card information such as:
Current Status, Profile Management and Diagnostics. The client utility will be installed
automatically after installing the driver and utility. After you have completed installing the driver and
utility, the client utility will automatically execute and show a small icon at the Taskbar whenever the
PCI Card is inserted into the PCI Slot of your computer. You can click the tags on the top of the
windows to select various screen messages as shown in Figure 2-9.
Figure 2-8