Honda Gold Wing 2018 Owner's Manual page 197

Tire Puncture u Removing Wheels
7.
GL1800/D/DA
Support your motorcycle securely and
raise the rear wheel off the ground
using the center stand or a hoist.
GL1800B/BD
Support your motorcycle securely and
raise the rear wheel off the ground
using a maintenance stand or a hoist.
8. Remove the rear wheel nuts, and
remove the rear wheel.
Rear wheel nuts
Rear wheel nuts
194
Installation
1. To install the rear wheel, reverse the
removal procedure.
2. Install the rear wheel and tighten the
rear wheel nuts equally in the crisscross
pattern in two or three steps.
Torque: 80 lbf·ft (108 N·m, 11.0 kgf·m)
3. Install the parts in the reverse order of
removal.
4. Check that the wheel rotates freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Rear wheel