Other Replacement; Replacing The Honda Smart Key Battery - Honda Gold Wing 2018 Owner's Manual

Other Replacement

Replacing the Honda SMART
Key Battery
If the Honda SMART Key indicator flashes 5
times when the ignition switch is turned
ON, the low battery pop-up information
appears, or the operating range becomes
unstable, replace the battery as soon as
possible.
We recommend to see your dealer for this
service.
Battery type: CR2032
170
1. Push the release button and remove the
built-in key from the Honda SMART Key.
Honda SMART Key
Release button
Built-in key
2. Slightly insert the built-in key from the
opposite side into the key hole.
3. With the emblem upward, separate the
Honda SMART Key by prying the built-in
key as shown in the illustration.
Do not pry the built-in key forcibly.
u
Do not touch the circuit or terminal.
u
This may cause problems.
Be careful to avoid scratching the
u
waterproof covering or allowing dust
to enter.
Do not forcibly dismantle the Honda
u
SMART Key body.
Emblem
Key hole
Built-in key
Battery