Advanced
To display and access the Wi-Fi Advanced Settings options, click Show Advanced Settings.
Use the Advanced Settings options to change the following:
Band — Select the desired Band from the dropdown menu. Band options are either 5 GHz or
•
2.4 GHz.
Bandwidth — Select the desired Bandwidth from the dropdown menu. Bandwidth options
•
are either 20/40 MHz or 20 MHz.
Channel — Select the desired Channel from the dropdown menu. Channel options are
•
automatic, 36, 40, 44, 48, 149, 153, 157, 161 or 165.
802.11 mode — 802.11 mode is 802.11a + 802.11n.
•
Security — Select the desired Security type from the dropdown menu. Security type options
•
are either WPA2 Personal/PSK (AES) or None.
Display Wi-Fi name — Click the checkbox to display the Wi-Fi name on the Jetpack display.
•
Display Wi-Fi password — Click the checkbox to display the Wi-Fi password on the Jetpack
•
display.
Broadcast Wi-Fi name — Click the checkbox to display your Jetpack Wi-Fi network in the list
•
of available Wi-Fi networks on your connected devices. .
Wi-Fi privacy separation — Click the checkbox to prevent connected devices from
•
communicating with each other.
Wi-Fi Multimedia (WMM) — Click the checkbox to provide a higher priority for multimedia.
•
This setting must be turned on if you are using 802.11n.
WPS— Click the checkbox to allow devices to connect to your Jetpack Wi-Fi network without
•
manually entering the Wi-Fi password.
➊
To change the Band, Bandwidth, Channel, 802.11mode, or Security, select the desired option
FPO
Show Advanced Jetpack Settings
67