Radio Thermostat CT110 Install Manual page 7

Mount the Wall plate to wall
rock or if you are using the old mounting holes, use the plastic anchors
provided. Mark first and drill a 3/16-in.(4.8mm) hole for the insert at each
screw location, then mount the unit.
Screw to wall
NOTE: If you are mounting to sheet
1. Hold the CT110 wall plate
against the wall, with the wires
coming through the hole in the
wall plate.
2. Position wall plate for best
appearance.
3. Attach the wall plate to the
wall with the screws provided.
7
PG