Communicating Thermostat - Radio Thermostat CT110 Install Manual

Communicating Thermostat

The CT110 has a built in Z-Wave radio to connect you with a
home automation system. This can give you access to your
home's HVAC system even when you are away. It can also give
you access to web-based efficient energy management sites that
can help you save money and protect the environment. Refer to
specific instructions that came with your Z-Wave Hub on how to
join a device to your Z-Wave network.
Joining a Z-wave network...
1. Press and hold the Z-wave join button (
you hear a beep and the radio icon will blink on the CT110.
2. Follow your Hub's directions to join the device to your network.
3. Check to see if the CT110 has joined your network.
Congratulations, you have successfully installed your unit.
Please proceed to the OPERATING Guide to initialize the CT110.
) on the CT110 unitl
Z-Wave join
MODE
FAN
Button
button
button
Temperature
adjust buttons
12
PG