Table of Contents
Advertisement
Basic CLI Commands
Monitor CLI Commands
ccag
Syntax
ccag ccag-id [path {a | b}] [type {sap-sap | sap-net | net-sap}] [interval seconds] [repeat repeat]
[absolute | rate]
Context
monitor
Description
Displays monitor command output of traffic statistics for Cross Connect Aggregation Groups (CCAGs)
ports.
Parameters
ccag-id — Specifies the CCAG instance to monitor.
path — Specifies the CCA path nodal context where the CCA path bandwidth, buffer and accounting
parameters are maintained. The path context must be specified with either the a or b keyword
specifying the CCA path context to be entered.
type — Specify cross connect type.
Values
interval — Configures the interval for each display in seconds.
Default
Values
repeat repeat — Configures how many times the command is repeated.
Default
Values
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of
the delta.
cpm-filter
Syntax
cpm-filter
Context
monitor
Description
Displays monitor command output for CPM filters.
ip
Page 114
sap-sap, sap-net, net-sap
5 seconds
3 — 60
10
1 — 999
7950 SR OS Basic System Configuration Guide
Advertisement
Table of Contents
