Setting Date and Time
After inserting batteries you can set Date & Time.
- Press the MENU Button then the RIGHT Button to enter Internal Setting.
- Use UP / DOWN Buttons to select Date & Time Setting. Press OK, then the LEFT /
RIGHT Button to enter setting, see below;
- In the setup window, press the LEFT / RIGHT Button to select desired numbers
(date/time), see highlighted digits.
- Press the UP / DOWN button to adjust, then press OK to confirm.
You may press the MENU Button to cancel and exit setting.
- Note that you need to set date & time again after replacing exhausted batteries.
Formatting SD Card
With non-locked SD card inserted into the camera, you can format the card.
- Press the MENU Button then the RIGHT Button to enter Internal Setting.
- Use UP / DOWN Buttons to select Format Setting. Press OK, then UP / DOWN Button to
12