3D - Mitsubishi Electric WD-73640 Technical Training Manual

TECHNOLOGIES
Mitsubishi's 2011-2012 TV product line includes several technologies either new to the market place or
introduced in the recent past. These technologies include:

3D with built in IR synchronization emitters.

Stream TV™ Internet Media

Wireless Internet Ready and Built-in Wireless Internet
®

Bluetooth A2DP Audio Streaming
®

iPhone Remote Control App
In addition, Mitsubishi's Reliability and Service Technologies have evolved yet again. These technologies
will be discussed further.

3D

2011-2012 Mitsubishi TVs will support the mandatory HDMI 1.4a 3D signals intended for the United
States. However, there may be some 3D sources that are not compatible with the TVs. Specifically, the
TVs will support the 3D signals known as:

Frame Packing 1080p/24Hz and 720p/60Hz (primarily from Blu-ray players and gaming consoles).

Side-by-Side in 1080i/60Hz, 1080p/24Hz/30Hz/60Hz and 720p/60Hz.

Top/Bottom in 1080p/24Hz and 720p/60Hz.

Checkerboard 1080p/60Hz.
In all cases:
(1) 3D sources must connect to the TV using the HDMI inputs or via StreamTV™ Internet Media.
(2) Active Shutter 3D glasses are required in order to view 3D content. They must be synchronized
using either IR or DLP-Link. IR synchronization must use either the TV's internal IR emitter or an
external IR emitter connected to the rear of the TV.
7
Introduction