Kenmore 970C4250 Use & Care Manual page 21

Changing Temp Display to Fahrenheit (ºF) or Celsius (ºC)
The electronic oven control is set to display °F when shipped
from the factory. The display may be changed to show either °F
or ºC oven temperatures.
To change temperature display mode from °F to °C or from
°C to °F:
1. Press and hold Broil for 6 seconds.
2. Once F (or C) appears in the display, press Self Clean key
to toggle between Fahrenheit and Celsius temperature
display modes (Figure
3. Press START to accept the choice.
Note: The oven temperature display cannot be changed during
the cooking process or if a Delay Start has been set or Self
Clean is active.
Figure 25: Display showing Fahrenheit and Celsius
Changing Between Continuous Bake Setting or 6 Hour
Energy Saving
The oven control has a factory preset built-in 6 Hour Energy
Saving feature that will turn off the oven if the oven is left on for
more than 6 hours. The control may be programmed to override
this feature to bake continuously.
To change between continuous bake or 6 hour energy saving
feature:
1. Press and hold Timer ON/OFF for 6 seconds
2. Press the Self Clean key to toggle between 6 Hour OFF or
Stay On feature (Figure
3. Press START to accept choice.
Figure 26: 6 hr energy saving (L) and continuous setting (R)
25).
26).
Setting Oven Lockout
The Oven Lockout function also locks the cooktop on this model.
To activate the oven lockout features:
1. Be sure oven door is completely closed.
2. Press Lock key for 3 seconds.
3. The motor driven door latch mechanism will begin locking
the oven door automatically. Do not open the oven door.
Allow about 15 seconds for the oven door to completely
lock. Once door is locked, the word DOOR with a lock icon
will appear in the display.
To cancel the oven lockout feature:
1. Press and hold the Lock for 3 seconds.
2. The motor door latch will begin unlocking the oven door
automatically. Do not open the oven door. Allow about 15
seconds for the oven door to completely unlock.
3. When the word DOOR with a lock icon no longer displays,
the oven door may be opened.
Important note:
• To avoid damage to the oven door latching mechanism, do
not attempt to open or close the oven door whenever the
word DOOR with a lock icon is displayed. If a control key is
pressed when oven lockout is active, the control will triple
beep indicating the key action is not available when the
oven lockout feature is active.
21
Oven Controls