Making A Dynamic Priority Change (Conventional Scan Only); Deleting A Nuisance Channel - Motorola 1.5 User Manual


Making a Dynamic Priority Change (Conventional
Scan Only)
While the radio is scanning, the dynamic priority change feature
allows you to temporarily change any channel in a scan list
(except for the Priority-One channel) to the Priority-Two
channel.
This change remains in effect until scan is turned off. Scan then
reverts to the preprogrammed (original) setting.
Procedure:
1
When the radio locks onto the channel designated as the
new Priority-Two channel, press the preprogrammed
Dynamic Priority button.
2
The radio continues scanning the remaining channels in the
list.


Deleting a Nuisance Channel

If a channel continually generates unwanted calls or noise
(termed a "nuisance" channel), you can temporarily remove the
unwanted channel from the scan list.
This capability does not apply to priority channels or the
designated transmit channel.
Procedure:
1 Press and hold the Menu Select button below Scan or
preprogrammed Scan button to delete the nuisance
channel.
OR
When the radio is locked onto the channel to be deleted,
press the preprogrammed Nuisance Delete button.
OR
Press the Menu Select button directly below Nuis.
2
The radio continues scanning the remaining channels in the
list.
33
English