Going Out Of Range; Using The Site Trunking Feature; Locking And Unlocking A Site - Motorola 1.5 User Manual



Going Out of Range

When your radio goes out of the range of the system, it can no
longer lock onto a control channel.
Procedure:
1
You hear a low-pitched tone.
AND/OR
The display shows the currently selected zone/channel
combination and Out of range.
2
Your radio remains in this out-of-range condition until:
It locks onto a control channel.
OR
It locks onto a failsoft channel.
OR
It is turned off.


Using the Site Trunking Feature

If the zone controller loses communication with any site, that
site reverts to site trunking.
The display shows the currently selected zone/channel
combination and Site trunking.
Note: When this occurs, you can communicate only with
other radios within your trunking site.
40
English


Locking and Unlocking a Site

This feature allows your radio to lock onto a specific site. This
feature should be used with caution, since it inhibits roaming to
another site in a wide-area system.
Procedure:
Use the preprogrammed Site Lock/Unlock button to toggle the
lock state between locked and unlocked.
OR
Follow the procedure below.
1
Press the Menu Select button directly below Site.
2
Press the Menu Select button directly below Lock to lock
the site. The display shows Site locked.
OR
Press the Menu Select button directly below Unlk to unlock
the site. The display shows Site unlocked.
3
The radio saves the new site lock state and returns to the
Home screen.