Fiat 500 Abarth 2015 Owner's Manual page 161

To adjust the brightness, proceed as follows:
1. Press the UP or DOWN
required brightness level.
2. Briefly press the MENU button to go back to the menu
screen or press and hold the MENU (approximately
one second) to go back to the main screen without
storing settings.
Speed Beep (Speed Limit)
With this function, it is possible to set the car speed limit
(mph or km/h) to immediately alert the driver when the
set limit is exceeded.
To set the speed limit, proceed as follows:
1. Briefly press the MENU button to enter the Main
MENU.
2. Press the UP
Speed Beep. Press the MENU button, press the
button to set the
UP
activation (On) or deactivation (Off).
3. When the function is activated (On), briefly press the
MENU button to display the presently set activation
speed. Pressing the UP
selects the speed limit. Press MENU to confirm
selection.
NOTE: The setting can be increased or decreased by
5 mph or km/h each time the UP/DOWN button is
pressed for speed settings above 20 mph (32 km/h). To
increase or decrease the set speed rapidly, press and hold
the UP/DOWN button. Save the setting by briefly press-
ing the button when you approach the required setting.
UNDERSTANDING YOUR INSTRUMENT PANEL 159
or DOWN
or DOWN buttons to select Speed Limit
or DOWN
button to select
buttons
4