Download Print this page

Canarm DUAL MOUNT SERIES Installation Instructions Manual

Advertisement

Quick Links

CANARM 5 YEAR LIMITED WARRANTY
"THANK YOU" for purchasing a Canarm product. It is our policy to furnish you with
high quality products at a fair price. With proper installation your fan should provide you with
years of money saving comfort.
This fan is guaranteed to be free from defects in workmanship and material for a
period of five (5) years from date of purchase. Within the first (1) year from date of
purchase any defective product should be returned to your RETAIL OUTLET along with proof
of purchase. For the balance of the warranty, four (4) years, the MOTOR WINDINGS ONLY
shall be free of defects. We will correct such defects or replace the motor assembly at our
option if the product is returned, FREIGHT PREPAID, to Canarm. The returned fan must be
accompanied by your proof of purchase and a cheque for $20.00 for handling and
labour charges.
All costs of removing and re-installing the product are YOUR RESPONSIBILITY
Damage to any part as such by accident, misuse, improper installation or by affixing any
accessories IS NOT covered by this warranty. As a result of varying climatic conditions in our
area this warranty does not cover any changes in finishes, including rusting, pitting, corroding,
tarnishing or peeling.
WARRANTY VOID: In cases of alteration, abuse, installation not in accordance with
instructions or REMOVAL of the C.S.A. Sticker.
CF-15
08/13
,
I
N
I
N
.
!

TOOLS AND MATERIALS REQUIRED

NOTE: FOR OPTIMUM QUIETNESS, FULLY ASSEMBLE FAN AND RUN 24 HOURS
CANARM LTD.
QUESTIONS OR CONCERNS CONTACT CANARM AT:
2157 Parkedale Ave.,
Brockville, Ontario
K6V 5V6
PH: (613) 342-5424
Monday through Friday 8:00 a.m. to 5:00 p.m. E.S.T.
FX: (613) 342-8437
S
T
A
L
L
A
T
I
O
N
I
N
S
T
R
U
S
T
A
L
L
A
T
I
O
N
I
N
S
T
R
U
DUAL MOUNT SERIES
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
INSTALLATION AND WIRING TO BE IN ACCORDANCE WITH CEC,
NEC, LOCAL ELECTRICAL CODES and ANSI/NFPA 70.
Consult a qualified electrician if you are not familiar with wiring.
- Philips Screw Driver
- Step Ladder
- Blade Screw Driver
- Wire Cutters
- Wiring supplies as required by electrical code.
1-800-265-1833 (English)
1-800-567-2513 (French)
C
T
I
O
N
S
C
T
I
O
N
S
CANARM LTEE.
8500 Rue Grenache,
Anjou, Quebec
H1J 2B1
PH: (514) 353-2255
FX: (514) 353-2522

Advertisement

loading

Summary of Contents for Canarm DUAL MOUNT SERIES

  • Page 1: Tools And Materials Required

    CANARM 5 YEAR LIMITED WARRANTY 08/13 “THANK YOU” for purchasing a Canarm product. It is our policy to furnish you with high quality products at a fair price. With proper installation your fan should provide you with years of money saving comfort.
  • Page 2: Safety Precautions

    - Check distance between blade tip to blade tip. All measurements should be equal. Loosen blade - To reduce the risk of fire or electrical shock, ONLY use Canarm model CQ002 screws and position blade until even then re-tighten. remote control for optional remote control adaptability.
  • Page 3: Light Kit

    ASSEMBLY DRAWING MOUNTING BLADES TO MOTOR - Insert the blade arm into the fan as shown. 1. Wooden Joist - Tighten the blade arm to motor with the screw and lock washer as shown. 2. Approved (CSA for Canada - Slightly turn the blade after installation and repeat the same step for the other blades. and UL for U.S.) ceiling fan box (not provided) 3.
  • Page 4: Installation

    NOTE: INST ALLA TION All set screws must be checked and INST ALLA TION MOUNT BLADE BRACKETS TO BLADES retightened where necessary, before and after installation. MOUNTING OPTION - Place blade bracket screw through flat washer, fibre washer and blade. - Align with corresponding hole in blade bracket.
  • Page 5: Install Mounting Bracket

    MOUNTING FAN ASSEMBLY INSTALL MOUNTING BRACKET - Place two screws and washers on mounting plate (marked B on diagram) WARNING: To Reduce The Risk Of Fire, Electric Shock, Or Personal which correspond with slots in canopy. Screw in two turns. Injury, Mount To UL/CSA Listed Outlet Box Marked Acceptable for - Position canopy to mounting plate aligning slots to screws (marked B on Fan Support And Use Mounting Screws Provided With The Outlet Box.
  • Page 6: Supply Circuit

    ELECTRICAL HOOK-UP ELECTRICAL HOOK-UP Make the following wire connections to the receiver unit (see fig. 5) using the - Push all connected wires up into ceiling box. wire nuts supplied. - Position the receiver into the canopy as shown direction. - connect GREEN fan wire to BARE (ground) wire.