Download Print this page

Canarm DUAL MOUNT SERIES Installation Instructions Manual

Advertisement

Quick Links

CANARM 5 YEAR LIMITED WARRANTY
"THANK YOU" for purchasing a Canarm product. It is our policy to furnish you with
high quality products at a fair price. With proper installation your fan should provide you with
years of money saving comfort.
This fan is guaranteed to be free from defects in workmanship and material for a
period of five (5) years from date of purchase. Within the first (1) year from date of
purchase any defective product should be returned to your RETAIL OUTLET along with proof
of purchase. For the balance of the warranty, four (4) years, the MOTOR WINDINGS ONLY
shall be free of defects. We will correct such defects or replace the motor assembly at our
option if the product is returned, FREIGHT PREPAID, to Canarm. The returned fan must be
accompanied by your proof of purchase and a cheque for $20.00 for handling and
labour charges.
All costs of removing and re-installing the product are YOUR RESPONSIBILITY
Damage to any part as such by accident, misuse, improper installation or by affixing any
accessories IS NOT covered by this warranty. As a result of varying climatic conditions in our
area this warranty does not cover any changes in finishes, including rusting, pitting, corroding,
tarnishing or peeling.
WARRANTY VOID: In cases of alteration, abuse, installation not in accordance with
instructions or REMOVAL of the C.S.A. Sticker.
CF-4
01/15
,
I
N
I
N
.
!

TOOLS AND MATERIALS REQUIRED

NOTE: FOR OPTIMUM QUIETNESS, FULLY ASSEMBLE FAN AND RUN 24 HOURS
CANARM LTD.
QUESTIONS OR CONCERNS CONTACT CANARM AT:
2157 Parkedale Ave.,
Brockville, Ontario
K6V 5V6
PH: (613) 342-5424
Monday through Friday 8:00 a.m. to 5:00 p.m. E.S.T.
FX: (613) 342-8437
S
T
A
L
L
A
T
I
O
N
I
N
S
T
R
U
S
T
A
L
L
A
T
I
O
N
I
N
S
T
R
U
DUAL MOUNT SERIES
"INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS"
"READ ALL INSTRUCTIONS"
"IMPORTANT SAFETY
INSTRUCTIONS"
"SAVE THESE INSTRUCTIONS"
INSTALLATION AND WIRING TO BE IN ACCORDANCE WITH CEC,
NEC, LOCAL ELECTRICAL CODES and ANSI/NFPA 70.
Consult a qualified electrician if you are not familiar with wiring.
- Philips Screw Driver
- Step Ladder
- Blade Screw Driver
- Wire Cutters
- Wiring supplies as required by electrical code.
1-800-265-1833 (English)
1-800-567-2513 (French)
C
T
I
O
N
S
C
T
I
O
N
S
CANARM LTEE.
8500 Rue Grenache,
Anjou, Quebec
H1J 2B1
PH: (514) 353-2255
FX: (514) 353-2522

Advertisement

loading

Summary of Contents for Canarm DUAL MOUNT SERIES

  • Page 1: Tools And Materials Required

    CANARM 5 YEAR LIMITED WARRANTY 01/15 “THANK YOU” for purchasing a Canarm product. It is our policy to furnish you with high quality products at a fair price. With proper installation your fan should provide you with years of money saving comfort.
  • Page 2: Safety Precautions

    - Check distance between blade tip to blade tip. All - To reduce the risk of fire or electrical shock, ONLY use Canarm model CQ002 measurements should be equal. Loosen blade remote control for optional remote control adaptability.
  • Page 3: Assembly Drawing

    DETACHABLE LIGHT KITS Fig.10l Fig.10k ASSEMBLY DRAWING 1. Wooden Joist 2. Approved (CSA for Canada and UL for U.S.) ceiling fan box (not provided) 3. Ceiling Glass 4. J-Hook 5. Rubber Gasket 6. Screws & Lock Washers (set of 4) Tighten the guard to the light fixture by the screws.
  • Page 4: Installation

    NOTE: INST ALLA TION All set screws must be checked and INST ALLA TION retightened where necessary, before and after installation. MOUNTING OPTION DOWNROD MOUNT - Using a Philips screwdriver loosen the two upper jam screws on the yoke. - Position downrod inside canopy. - Route wires exiting yoke on motor through ceiling canopy and downrod.
  • Page 5: Install Mounting Bracket

    INSTALL MOUNTING BRACKET MOUNTING BLADES TO MOTOR Take out hardware containing motor screws, lock washers and gaskets. WARNING: To Reduce The Risk Of Fire, Electric Shock, Or Personal - Place lock washers over motor screws, position motor screws in blade Injury, Mount To UL/CSA Listed Outlet Box Marked Acceptable for brackets, place fibre bracket gaskets over screws and secure to motor.
  • Page 6 MOUNTING FAN ASSEMBLY - Place two screws and washers on mounting plate (marked B on diagram) which correspond with slots in canopy. Screw in two turns. - Position canopy to mounting plate aligning slots to screws (marked B on diagram) then turn to lock. - Position and tighten the two screws and washers (marked A on diagram) then tighten the two screws (marked B on diagram).