Download Print this page

Canarm Industrial Installation Instructions Manual

Advertisement

Quick Links

CANARM 20 YEAR LIMITED WARRANTY
"THANK YOU" for purchasing a Canarm product. It is our policy to furnish you with
high quality products at a fair price. With proper installation your fan should provide you with
years of money saving comfort.
This fan is guaranteed to be free from defects in workmanship and material for a
period of twenty (20) years from date of purchase. Within the first (1) year from date of
purchase any defective product should be returned to your RETAIL OUTLET along with proof
of purchase. For the balance of the warranty, nineteen (19) years, the MOTOR WINDINGS
ONLY shall be free of defects. We will correct such defects or replace the motor assembly at
our option if the product is returned, FREIGHT PREPAID, to Canarm. The returned fan must be
accompanied by your proof of purchase and a cheque for $20.00 for handling and
labour charges.
All costs of removing and re-installing the product are YOUR RESPONSIBILITY
Damage to any part as such by accident, misuse, improper installation or by affixing any
accessories IS NOT covered by this warranty. As a result of varying climatic conditions in our
area this warranty does not cover any changes in finishes, including rusting, pitting, corroding,
tarnishing or peeling.
WARRANTY VOID: In cases of alteration, abuse, installation not in accordance with
instructions or REMOVAL of the C.S.A. Sticker.
CP56
11/12
,
I
N
I
N
.
!

TOOLS AND MATERIALS REQUIRED

Note to Installer: You are obligated to pass these instructions on to
NOTE: FOR OPTIMUM QUIETNESS, FULLY ASSEMBLE FAN AND RUN 24 HOURS
CANARM LTD.
QUESTIONS OR CONCERNS CONTACT CANARM AT:
2157 Parkedale Ave.,
Brockville, Ontario
K6V 5V6
PH: (613) 342-5424
Monday through Friday 8:00 a.m. to 5:00 p.m. E.S.T.
FX: (613) 342-8437
S
T
A
L
L
A
T
I
O
N
I
N
S
T
R
U
S
T
A
L
L
A
T
I
O
N
I
N
S
T
R
U
Model: Industrial
"INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS"
"READ ALL INSTRUCTIONS"
"IMPORTANT SAFETY
INSTRUCTIONS"
"SAVE THESE INSTRUCTIONS"
INSTALLATION AND WIRING TO BE IN ACCORDANCE WITH CEC,
NEC, LOCAL ELECTRICAL CODES and ANSI/NFPA 70.
Consult a qualified electrician if you are not familiar with wiring.
- Philips Screw Driver
- Step Ladder
- Blade Screw Driver
- Wire Cutters
- Wiring supplies as required by electrical code.
building maintenance or location Supervisor.
1-800-265-1833 (English)
1-800-567-2513 (French)
C
T
I
O
N
S
C
T
I
O
N
S
CANARM LTEE.
8500 Rue Grenache,
Anjou, Quebec
H1J 2B1
PH: (514) 353-2255
FX: (514) 353-2522

Advertisement

loading

Summary of Contents for Canarm Industrial

  • Page 1: Tools And Materials Required

    ONLY shall be free of defects. We will correct such defects or replace the motor assembly at our option if the product is returned, FREIGHT PREPAID, to Canarm. The returned fan must be accompanied by your proof of purchase and a cheque for $20.00 for handling and labour charges.
  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS 1. Turn off power at main electrical service box before starting installation. 2. Electrical connections must comply with local code ordinances, national electrical codes, CEC, NEC and ANSI/NFPA 70. 3. Make sure the installation site you choose allows the fan blades to rotate freely without any obstructions.
  • Page 3: Assembly Drawing

    ASSEMBLY DRAWING 1. Wooden Joist 2. Approved (CSA for Canada and UL for U.S.) ceiling fan box (not provided) 3. Ceiling 4. J-Hook 5. Rubber Gasket Mounting Plate Outlet Box Screws (not provided) Blade Downrod c/w Ground Wire Ceiling Canopy 11.
  • Page 4: Install Mounting Bracket

    INSTALL MOUNTING BRACKET WARNING: To Reduce The Risk Of Fire, Electric Shock, Or Personal Injury, Mount To UL/CSA Listed Outlet Box Marked Acceptable for Fan Support And Use Mounting Screws Provided With The Outlet Box. Install J-Hook through centre of outlet box and into the wooden joist. - Secure mounting plate and rubber gaskets to outlet box by outlet box screws.
  • Page 5 ELECTRICAL HOOK-UP TROUBLESHOOTING TROUBLE SUGGESTIONS Make the following wire connections to the receiver unit (see fig. 3) using the 1. Fan will not start - Check wiring connections to fan. wire nuts supplied. Connect GREEN fan wire to BARE Copper wire or GREEN housheld - Check fuses and circuit breakers.
  • Page 6: Final Installation

    FINAL INSTALLATION INSTALLATION OF W ALL CONTROL Mount the blade on motor assembly. - Connect the wires as shown. Connect BLACK wall control wire (marked with “AC in L”) to the BLACK wire form main power on the wall outlet box. Connect BLACK wall control wire (marked with “TO Motor L”) to the BLAKC wire that connected to the BLACK wire of the fan from ceiling.