Advertisement
(BEFORE > AFTER > SOUND >LIGHT > HOURS > DATE > RECORD > TEST)
Your e-pill Med-Time XL offers several important options and additional functions to help your
patient remember to take medications on time and to help build flexibility into the medication
schedule. These optional settings and features can be accessed using Mode-B. Setting of
Mode-B functions are optional and are not required for operation of your e-pill Med-Time XL.
Additional Settings
1. Press and Hold Button 3 for five seconds until it reads BEFORE.
2. Tap Button 1 until you reach the feature you want to change.
Each tap of Button 1 moves you to the next feature: BEFORE > AFTER > SOUND
>LIGHT > HOURS > DATE > RECORD > TEST > BEFORE ....
3. Exit Mode-B at any time by pressing and holding Button 1 for five seconds. Pressing
button 1 stores your settings and returns the dispenser to normal operating mode (the
current time is displayed).
Set Early Dose (BEFORE)
The early dose feature allows you to take medications before their normal scheduled time.
Simply pickup the dispenser, turn it over twice and put it down. The next set of medications
will rotate into position. Early Dose settings from 5 minutes to 30 minutes are possible
(default time is 30 minutes).
1. Press and hold Button 3 for five seconds until the
display reads BEFORE.
2. Press Button 2 Down or Button 3 Up to set the
timeframe that a user can pre-pour medications (0-30
minutes maximum).
3. If the early dose feature is not required, set at 00:00.
4. Press Button 1 to set.
If the unit returns to Normal mode, follow steps outlined
for setting each function.
Set Alarm Duration (AFTER)
Alarm duration allows you to set the duration of the sound from 5 minutes to 60 minutes
(default time is 60 minutes).
1. Press and hold Button 3 for five seconds until the display reads BEFORE, then tap
Button 1 repeatedly until AFTER displays.
2. Press Buttons 2 Down or 3 Up to set the time desired, 5 minutes to 1 hour (60
minutes = 1.00 hour) maximum.
3. Press Button 1 to set.
If the unit returns to Normal mode, follow steps outlined for setting each function.
ADDITIONAL SETTINGS = Mode-B.
Page 5 of 12
Figure 7: Before
Advertisement
