Advertisement
SET UP YOUR e-pill Med-Time XL AUTOMATIC PILL DISPENSER
Before you can begin to use your new e-pill automatic pill dispenser, you must set it up. At a
minimum you must set the current time, number of daily alarms (doses) and the alarm times
under Mode-A (basic settings).
Additional optional functions (Mode-B) include alarm tone, alarm duration, dispensing history
log file, early dose, auto daylight saving time, visual alarm and diagnostic tests.
Your e-pill Med-Time XL contains two programming modes, Mode-A and Mode-B, to
program system functions (see below).
Mode-A: Tap button 1 to move between menu choices (CLOCK > DOSES > ALARMS >).
Mode-B: To reach Mode-B, first press and hold BUTTON 3 for five (5) Seconds until the word
BEFORE appears. Release button 3. Tap button 1 to move between menu choices
BEFORE > AFTER > SOUND > LIGHT > HOURS > DATE > RECORD > TEST > BEFORE
Please remember to press Button 1 for 5 seconds to store your settings. Your Med-Time XL
responds by memorizing the settings and returning to normal operating mode (shows current
time on the display).
1.
NOTE
2.
Mode-A
CLOCK
DOSES
ALARMS
After you complete the set-up of either Mode-A or Mode-B
functions, press Button 1 for Five (5) Seconds to store the
settings and return to normal operating mode.
If you press no Buttons for 30 seconds, Med-Time XL automatically
returns to normal operating mode (automatic time-out).
Page 4 of 12
Mode-B
BEFORE
AFTER
SOUND
LIGHT
HOURS
DATE
RECORD
TEST
Advertisement
