MODELS: DFI-550-36, DFI-550-37, DFI-550-38, DFI-550-39, DFI-550-40
Go to www.tsicustomerservice.com for product warranty registration
ASSEMBLY INSTRUCTIONS
1
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
-- POWER
The Power button supplies power to all of the functions of the stove and will
illuminates the flame effect. This switch must be lit for any of the functions to work.
-- FLAME
Use "+"or "--" to increase or decrease the flame brightness levels.
-- HEATER
The stove consists of a infrared type heater. The HEATER button turns the heater to
1000W Low Heat or 1500W high heat and Off.
PRODUCT SPECIFICATIONS
VOLTAGE
AMPS
WATTS
Distributed by
Twin-Star International, Inc. Under license.
duraflame™ and the duraflame flame
logo are trademarks of Duraflame, Inc.
2
Control Panel Location
120 VAC, 60 Hz
12.5 Amps
1500 Watts
Twin-Star International, Inc.
Delray Beach, FL 33445
Made in China • Printed in China
3
Remote Control
For Customer Service:
www.tsicustomerservice.com
8:30 a.m.-5:30 p.m., EST, Monday-Friday
Note: When first running the heater there can
be an odor. This is normal, the heater has a
surface coating on the internal parts, for the
first several hours of operation the coating
reacts with the internal parts to permanently
protect them. The odor is safe; if you are
sensitive to the odor it is recommended
to run the heater in a well-ventilated area until
the odor dissipates.
Warning: This is an unvented, electric
appliance. DO NOT attempt to burn wood or
manufactured firelogs in or on this appliance
or grate.
MOUNTING THE LEGS
1) Align the 2 mounting
tabs into the bracket.
2) Slide the legs outward
to lock in place. When
locked in position the
screw hole from step
3 will be aligned.
Fasten the legs to the
3)
base using the included
screws,1 per leg
.
Control Panel
(+1) 888-674-7517
Made in China
Printed in China
© 2017,Twin-Star International,Inc.
A607