Table of Contents
Advertisement
WIT-300H Installation Manual
Issue: 0.1C
A. MFIM configuration
(1) Set the deep switch '3' to '1' as follows.
It means that the MAC address of WIT-300H doesn't need to be registered in the MFIM. If
the MAC address of the WIT-300H has been registered, MFIM configuration is not
something to be concerned.
B. SSID setting
(1) Enter SSID for wireless networking at "
Config> SSID". User can probe all the APs around the WIT-300H, and choose one of them
at "Auto" menu shown here.
After setting these all up, please turn off WIT-300H and then turn it on.
4.
S/W Upgrade
. The S/W image of WIT-300H composed of three binary files; wit300hDbg.bin, Drv_C.bin, Drv_M.bin.
(1) wit300hDbg.bin : It includes H/W support kits; WLAN driver, Operating system core,
DSP/LCD drivers, etc.
(2) Drv_C.bin : It is the collection of business S/W; phonebook, Messaging, Screen manipulator,
etc.
(3) Drv_M.bin : It is the compressed collection of graphic widgets; icon, bitmap, images, etc.
4.1
USB S/W Downloading
USB is the easiest interface for customer to download S/W image into WIT-300H. Just plugging in a USB
cable into PC keeping the image is a manual job for the downloading. The following "Flash-up" S/W
needs to be installed in the PC.
A. Connecting USB cable
(1) Plug in the USB cable in the PC which Microsoft Windows is installed.
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG Electronics company
(MENU) > Settings > Network > 802.1b
21
Date:: 30/Jan/05
Advertisement
Table of Contents
