Rear Panel - Redx Sapphire III Owner's Manual

Rear Panel

1 2
1
Power switch:
Use this power switch to turn the unit on or off.
2
Power Cord Socket:
Here is where you connect the detachable power cord included with your amplifier. Plug the other end of the power
cord into an AC outlet properly configured with the voltage required for your particular model. Be sure the AC outlet
can supply enough current to allow full power operation of all the amplifiers plugged into it. The outlet should be a
three-prong socket that matches the power cord.
Unplug the amplifier's power cord from the outlet when the amplifier will be left unused for a long period of
time.
3
Speakon Outputs:
Connect the amplifier to the speaker using professional cables with twist-locking plugs.
4
Ethernet ports:
Use Cat-5 shielded twisted pair to connect amplifier with PC/network switch or connect amplifier with other amplifier.
5
XLR Inputs:
Use XLR or 1/4" TRS balanced port to input signals.
6A 6B
AMP MODE Switch (BRIDGE/STEREO):
Switch mode between BRIDGE and STEREO.
Be sure to power off the amplifier before changing the AMP Mode switch setting.
Sapphire III（Base）Power Amplifier
Sapphire III
Sapphire III Base
3 4 5 6B 6A
10