Numerical Display; Vector Graphs; View Vector Graphs; Adjust Scale - Fluke NORMA 4000 Operator's Manual

NORMA 4000/5000
Operators Manual

Numerical Display

For details regarding the numerical display of measured values, refer to the section,
"Measure Voltage, Current and Power," in Chapter 8.

Vector Graphs

Up to six signals of the H01 fundamentals can be viewed as vector graphs.
The vector graphs show voltage and current with amplitude and phase shift, and allow for
the fast assessment of signals and detection of errors in the connections.

View Vector Graphs

1. Press measuring keys Σ or 1...n and WAV to call up the desired values, that is,
2. Press measuring key Vector graphs.
Display
φ1 ... φ3
φU1
φU2
φU3
scale
3. To view a different channel or different measured values in vector graph form,

Adjust Scale

The scale of the vector in the vector diagram is adjustable.
1. To automatically optimize the scale of the graph, press function key Default.
8-16
Shop for Fluke products online at:
values measured at WAV power.
The measured values are shown in the form of vector graphs.
Phase angle between U and I
... reference point (always = 0)
Angle between U2 and U1
Angle between U3 and U1
Range (reference value for the diameter of the outer circle)
press measuring keys Σ or 1...n and WAV.
The scale is set to the measurement range.
MyFlukeStore
www.
Description
1.888.610.7664
.com
esn046.gif