Radio Wide Scan List; Determining Channels In Radio Wide Scan List - E.F. Johnson Company 5300 ES Series Operating Manual

Radio Wide Features
4 Select the channel you want to add or delete by rotating the Select switch. After the last
channel in the current zone is displayed, the first valid channel in the next zone is
displayed and vice versa. Lists are limited to 256 channels. If an attempt is made to add
more than 256, "LIST FULL" is displayed and a channel must be deleted before
another can be added.
Note Priority channels can be deleted.
5 If the selected channel is in the scan list (scanned), the
the zone number as just described. To change the scan list status of the displayed
channel, press the Select switch.
With conventional channels only, if the selected scan list is programmed with fixed
priority channel(s), the next press of the Select switch makes the current channel the
priority channel indicated by "P" in the left status display next to the zone number. If
dual priority channels are used, pressing the Select switch again makes it the second
priority channel indicated by "2" in the left status display. Then pressing the Select
switch again takes the channel out of the scan list. Refer to Sections 5.10.2 and 5.10.3
for more information on priority channel sampling.
6 To exit this mode and save the changes, press the

4.13.2 Radio Wide Scan List

With radio wide scanning, there is only one scan list available regardless of the type of
channel selected. This list is user programmable and can include up to 16 channels of any
type. For example, it could include six conventional channels and ten SMARTNET/
SmartZone channels. More information on selecting and editing radio wide scan lists
follows.
4.13.2.1
The channels can be determined only by selecting the scan list edit mode (see "Editing
Radio Wide Scan List" which follows).
When the displayed channel is in the scan list (scanned normally), the
displayed next to the zone number as shown in the following illustration.
4-12 5300 ES Series Mobile Radio Operating Manual

Determining Channels in Radio Wide Scan List

Scan List Indicator
symbol is displayed next to
option switch again.
SCN ED
Channel
Number
symbol is
March 2008