Package Contents; Product Overview - Monoprice 24456 User Manual

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
1x Monolith subwoofer
1x AC power cable

PRODUCT OVERVIEW

CROSSOVER: Use the CROSSOVER knob to adjust the upper limit of the subwoofer's
frequency response from 40 to 160 Hz. The subwoofer will output only those
frequencies below the set level. You should set the crossover frequency to obtain a
smooth and seamless transition from the subwoofer to the main speakers in your
system. If your main speakers are smaller units with limited low frequency output,
start with a higher frequency, such as in the 100-150 Hz range. With larger speakers
that have greater low frequency output, you might start with this control set lower,
such as in the 60-100 Hz range.
PHASE: This control allows you to alter the phase of the subwoofer's output signal from 0°
- 180° to correct for a possible mismatch in phase, which results in cancellation
between the subwoofer and your main speakers. To adjust the PHASE, listen to the
system with music playing and tune between 0° and 180° while listening for a
change in mid-bass output. The correct position will have a higher amount of
apparent mid-bass output.
5