SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. • This device is intended for indoor use only. •...
If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com. Check the website for support times and links.
PRODUCT OVERVIEW SSW-8 (33829) 1. POWER MODE: Controls the power status of the subwoofer. The unit is powered OFF when the switch is in the Off position. The unit is powered ON, regardless of the presence of an audio signal or not, when the switch is in the On position.
Page 5
2. LINE IN/SUB IN: The two RCA jacks accept a line level signal from the preamplifier output of a receiver or preamplifier. Use both jacks when connecting a stereo preamplifier output. Use the L channel input when connecting to a mono LFE subwoofer output. 3.
Page 6
SSW-10 (33830) and SSW-12 (35847) 1. OFF/ON: The power switch turns the subwoofer ON or OFF. 2. CROSSOVER: The rotary control sets the upper frequency for the subwoofer to handle, from 50-150 Hz. Initially, you should set the CROSSOVER to the lower frequency for the main speakers, then adjust it until the sound from the subwoofer blends in with the sound from the rest of the system.
the original LINE IN signal without modification for connecting to another powered subwoofer or amplifier. 4. HI LEVEL IN/HI LEVEL OUT: If your amplifier or receiver does not have a stereo preamplifier or mono LFE output, you can connect its speaker output to the HI LEVEL IN connectors.
TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates.
Modifying the equipment without Monoprice's authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
Page 11
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •...