Storing A Redial Number; Inserting A Pause In The; Reviewing , Changing Or - RCA TCH5401 User Manual

Press the 7 key 4 times for the letter S;
press the 6 key once for the letter M;
press the 4 key 3 times for the letter I;
press the 8 key for the letter T;
press the 4 key twice for the letter H.
3. Press the SAVE softkey the display shows ENTER NUMBER .
4. Use the keypad to enter the phone number (up to 32 digits).
5. Press the SAVE softkey to enter the VIP Tone Melody selection.
6. Use the VOL (
 or 
softkey to save.

Storing a Redial Number

1. Make sure the phone is OFF (not in TALK mode).
2. Press the Redial button on the handset to review the redial number.
3. Use the VOL ( or  ) to scroll to the desired number.
4. Press the SAVE softkey and ENTER NAME is displayed.
5. Use keypad to enter the name.
6. Press the SAVE softkey twice to enter the VIP Tone Melody selection.
7. Use the VOL ( or ) button to scroll to select the melody, then press the select
softkey to save the record..
Inserting a Pause in the Dialing Sequence
Press the #Pause button on the touch-tone pad twice to insert a delay in the dialing
sequence of a stored telephone number when a pause is needed to wait for a dial tone
(for example, after you dial 9 for an outside line, or wait for a computer access tone.)
Each pause counts as 1 digit in the dialing sequence. The letter "P" in the displayed
number indicates a pause.
Reviewing, Changing or Deleting Stored Names/Numbers
To Review: Press DIR/on the handset, then press the VOL (  or ) button to scroll
through the stored numbers.
To Change: While viewing the record, press the EDIT softkey. Follow Step 2 to 5
under Storing a Name and Number in Memory.
To Delete: Press DIR/on the handset, then press the VOL (  or ) button to scroll
to a desired memory.
) button to scroll to select the melody, then press the select
Memory
21