Table of Contents
Advertisement
Belt Clip Operation
Connecting the Belt Clip
There are two slots, one on each side of the handset.
• Attach the belt clip by inserting the sides of the belt clip into the slots. Snap the
ends of the belt clip into place.
Display Messages
The following indicators show the status of a message or of the unit.
LINE ON HOLD:
LINE IN USE:
OUT OF RANGE:
INCOMPLETE DATA:
BASE IN USE:
SELECT PHONE ID:
DELETE ALL:
NEW CALL:
NO NUMBER:
NO NAME:
NO DATA:
BLOCKED CALL:
BLOCKED NAME:
BLOCKED NUMBER:
UNKNOWN CALLER/
NAME/NUMBER:
The line you selected is currently on hold.
The line you selected is currently use by another
extension.
Indicates handset is too far away from the base,
and the handset is searching for the base.
Caller information has been interrupted during
transmission or the phone line is excessively noisy.
The Base unit is in use, handset is blocked.
Key in the ID of another extension.
Confirm deletion of all Caller ID records.
Call has not been reviewed.
No Caller Number was received.
No Caller Name was received.
No Caller ID information was received.
The person is calling from a number that has been blocked
from transmission.
The person's name is blocked from transmission.
The person is calling from a number that has been
blocked from transmission.
The incoming call is from an area not serviced by
Caller ID or the information was not sent.
Other Information
27
Advertisement
Table of Contents
