Control Techniques SM-encoder plus User Manual page 20

Table 6.1 Key to parameter coding
Coding
RW
RO
Bit
Bi
Uni
Txt
FI
DE
RA
NC
PT
US
PS
20
Read/write: can be written by the user
Read only: can only be read by the user
1 bit parameter
Bipolar parameter
Unipolar parameter
Text: the parameter uses text strings instead of numbers.
Filtered: some parameters which can have rapidly changing values are
filtered when displayed on the drive keypad for easy viewing.
Destination: indicates that this parameter can be a destination parameter.
Rating dependant: this parameter is likely to have different values and
ranges with drives of different voltage and current ratings. This parameters
is not transferred by smart cards when the rating of the destination drive is
different from the source drive.
Not cloned: not transferred to or from smart cards during cloning.
Protected: cannot be used as a destination.
User save: saved in drive EEPROM when the user initiates a parameter
save.
Power-down save: automatically saved in drive EEPROM at power-down.
www.controltechniques.com
Attribute
SM-Encoder Plus User Guide
Issue Number: 3