Displaying The Global Poe Status - ProCurve 2910al-24g Management And Configuration Manual

Power Over Ethernet (PoE+) Operation

Displaying the Global PoE Status

11-20
Displaying the Global PoE Status
Syntax: show power-over-ethernet [brief | [ethernet] <port-list> | all>]]
Displays the switch's global PoE power status.
brief: Displays PoE information for each port. See "Displaying PoE
Status on All Ports" on page 11-21.
<port-list>: Displays PoE information for the ports in <port-list>.
See "Displaying the PoE Status on Specific Ports" on page 11-23.
For example, show power-over-ethernet displays data similar to that in figure
11-7.
ProCurve(config)# show power-over-ethernet
Status and Counters - System Power Status
Pre-standard Detect : On
Operational Status
Usage Threshold (%) : 80
Chassis power-over-ethernet:
Total Provided Power:
Total Failover Power:
Total Redundancy Power:
Total Redundancy Power:
Total Allocated Power:
Figure 11-7. Example of Show Power-Over-Ethernet Output
: On
382 W
0 W
0 W
0 W
376 W +/- 6W