Menu: Port Status And Configuration - ProCurve 2910al-24g Management And Configuration Manual

Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
==========================- CONSOLE - MANAGER MODE -==========================
Port Type
----- ---------
1 100/1000T
2 100/1000T
3 100/1000T
4 100/1000T
5 100/1000T
6 100/1000T
7 100/1000T
8 100/1000T
9 100/1000T
10 100/1000T
11 100/1000T
Actions-> Back
Return to previous screen.
Use up/down arrow keys to scroll to other entries, left/right arrow keys to
change action selection, and <Enter> to execute action.
Figure 10-1. Example of a Switch Port Status Screen
10-4

Menu: Port Status and Configuration

From the menu interface, you can view and change the port configuration.
Using the Menu To View Port Configuration. The menu interface dis­
plays the configuration for ports and (if configured) any trunk groups.
From the Main Menu, select:
1. Status and Counters
4. Port Status
Status and Counters - Port Status
Intrusion
Alert Enabled
--------- -------
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
Intrusion log
Port Type
The port Type field represents the IEEE or other industry protocol in operation
on that port. For example, 1000Base-SX is a gigabit protocol for gigabit
operation over fiber optic cable.
Status Mode
------ ----------
Down 100FDx
Down 1000FDx
Down 1000FDx
Down 1000FDx
Down 1000FDx
Down 1000FDx
Down 1000FDx
Down 1000FDx
Down 1000FDx
Down 1000FDx
Down 1000FDx
Help
MDI Flow Bcast
Mode Ctrl Limit
----- ----- ------
Auto off 0
Auto off 0
Auto off 0
Auto off 0
Auto off 0
Auto off 0
Auto off 0
Auto off 0
Auto off 0
Auto off 0
Auto off 0