System Configuration - At$Sc - Daviscomms MTD2000 Command Manual

Command
AT$SD=0
Note: Restore factory default.
AT$SD=1
Note: Restore factory default except some
important user settings.
8.4 System Configuration – AT$SC
This command will retrieve and send the device settings all at one go via the command
channel. This command is not accessible via SMS due to large amount of data.
Note:
If the user is trying to retrieve device settings via SMS, the device will send out an
unsolicited response to indicate settings retrieval not allowed.
Syntax
Command
AT$SC or AT$SC?
Note: Query device setting.
Confidential
OK
OK
OK
$SV: <...>
$SI: <...>
$SS: <...>
$DB: <...>
$CA: <...>
$CS: <...>
$SIM: <...>
$OS: <...>
$ACC: <...>
$DEC: <...>
$MS: <...>
$MC: <...>
$GA: <...>
$PC: <...>
$PD: <...>
$FSD: <...>
$MD: <...>
$KR: <...>
$BC: <...>
$GM: <...>
$UM: <...>
$EI: <...>
$NC: <...>
$GF: <...>
$XE: <...>
$XB: <...>
DAVISCOMMS (S) PTE LTD
MTD2000 AT Command Guide R12
Response
Response
23 /105