Related Manuals for Daviscomms MTD1000
Summary of Contents for Daviscomms MTD1000
-
Page 1: User Guide
500151R04 DAVISCOMMS (S) PTE LTD MTD1000/Evaluation Kit User Guide Daviscomms Confidential... -
Page 2: Table Of Contents
Contents Preface Page No. System Overview ---------------------------------------------------------------------------------------- 2 Product Package Overview --------------------------------------------------------------------------- Interfacing the MTD1000/ Evaluation kit for AT commands communication ------------- 17 Firmware Downloading --------------------------------------------------------------------------------- 19 Terminology ----------------------------------------------------------------------------------------------- 23 1. System Overview 1.1 MTD1000 --------------------------------------------------------------------------------------------------- 1.2 Family of options available for MTD1000 hardware configurations-------------------------- 1.3 Understanding the product code of your hardware ---------------------------------------------... -
Page 3: System Overview
1. System Overview 1.1 MTD1000 The MTD1000 is a small, economical and low cost, high quality multi-purpose GPS/ GSM tracking solution for personal and vehicle tracking. It can also be used as 2-way telemetry to control relays and transmit short messages. With battery embedded, it can remain on standby for at least 24 hours. -
Page 4: Family Of Options Available For Mtd1000 Hardware Configurations
500151R04 DAVISCOMMS (S) PTE LTD 1.2 Family of options available for MTD1000 hardware configurations Model: MTD1000 - IE2N3F Embedded GPS antenna. External GSM antenna Easy in-vehicle mounting flange installation option. Model: MTD1000 - EIDN3F Embedded GSM/GPRS antenna. External GPS antenna... -
Page 5: Understanding The Product Code Of Your Hardware
500151R04 DAVISCOMMS (S) PTE LTD 1.3 Understanding the product model of your hardware The hardware product code as follows in your MTD1000 Model No: MTD1000 Example 1: Model No: MTD1000 (1) External GPS, (2) Internal GSM, (3) DC Jack Power Connector,... -
Page 6: Part Description Of Mtd1000
500151R04 DAVISCOMMS (S) PTE LTD 1.4 Parts Description of MTD1000 GSM External Antenna Connector SMA (option) Mounting Flange (Option) GSM Indicator Panic Button (Option) External Charging Indicator Antenna Connector GPS Indicator (option) Power Connector Data Connector DC Jack or 2pin... -
Page 7: Data Connector Pin Functions And Rs232 Tx & Rx Connection Diagram
500151R04 DAVISCOMMS (S) PTE LTD 1.5 Data connector pin functions and RS232 TX & RX connection diagram CONNECTOR ON MTD1000 UNIT (VIEW FROM OUTSIDE) IN-1 IN-3 IN-2 IN-4 OUT-3 OUT-1 OUT-2 NOTE: RXD IS DATA OUTPUT FROM MTD1000 UNIT TXD IS DATA INPUT TO... -
Page 8: Product Package Overview
DAVISCOMMS (S) PTE LTD 2. Product Package Overview 2.1 MTD1000 Evaluation kit package description In the MTD1000 evaluation kit box, you will receive 10 items as described below. i. MTD1000 device (GSM/GPRS/ GPS) The communication device that processes the GSM/GPRS and GPS functions. - Page 9 The receiver component required to receive GSM/GPRS data to the MTD1000 device in a network cell location. vii. Li- Polymer battery for MTD1000 An alternative solution to power up the MTD1000 without a power adaptor up to 24 hours. Voltage/ current specification: (3.7V/ 780mAh) viii.
-
Page 10: Installation And Starting Up On The Mtd1000
Connect the Li-Polymer battery to the into the MTD1000 Note: Do not use the internal Li-Ion battery beyond standard operating temperature of -10C to +50C. The MTD1000 can function directly from DC power supply adaptor without the internal Li- Ion battery. - Page 11 500151R04 DAVISCOMMS (S) PTE LTD Step 3 Connect the GSM/GPRS antenna to the GSM External Antenna Connector. Screw in the SMA connector firmly. Step 4 Connect the GPS antenna to the GPS External Antenna Connector. Screw in the SMA connector firmly.
- Page 12 DAVISCOMMS (S) PTE LTD Step 5 Connect this end to RS232 comport of PC An example of the MTD1000 hardware setup with the 10 pin data harness cable/ RS232 for AT command communications and firmware flashing. (Recommended) 11 of 23 Daviscomms Confidential...
-
Page 13: Led Indicators Description
500151R04 DAVISCOMMS (S) PTE LTD 2.3 LED indicators 2.3.1) RED LED (Charging Indicator) • Red LED constant on: Li-ion battery is charging • Red LED off: Charging completed Charge the battery by plugging in power adapter connector into the power connector of the unit. -
Page 14: Interfacing The Mtd1000/ Evaluation Kit For At Commands
500151R04 DAVISCOMMS (S) PTE LTD 3. Interfacing the MTD1000 / Evaluation kit for AT commands communication 3.1 Hyper-terminal settings How to create a hyper-terminal connection from your PC to your device Step 1 On the Windows Start menu, select Run..The Run dialog appears. - Page 15 500151R04 DAVISCOMMS (S) PTE LTD Step 3 On the Connection Description screen, for Name type "Daviscomms" or any name you would prefer and select an icon for the definition, and click OK. The Connect to dialog appears. HyperTerminal Connection Description dialog Step 4 On the Connect To dialog, select your primary COM port (COM1 e.g.
- Page 16 Step 6 To prove you have a valid connection to a modem, type "AT" and you should receive "OK" back from the MTD1000 device. You should now be communicating with the MTD1000 device at com-port 1. 15 of 23 Daviscomms Confidential...
-
Page 17: Evaluation Kit
3.2 Evaluation Kit 3.2.1 Evaluation kit usage description The evaluation kit is used for development purposes to test the MTD1000 unit on its functionalities on GSM/GPRS/GPS applications. You will not require to power up the evaluation kit if only for AT commands communication to the MTD-1000 unit. -
Page 18: Interfacing The Mtd1000/ Evaluation Kit For At Commands Communication
500151R04 DAVISCOMMS (S) PTE LTD 3.3 Jumper pin orientation Pin 1 Pin 3 Pin 2 3.3.1 Possible jumper selection configurations JUP 11 JUP 21 IN 4 IN 1 JUP 12 JUP 22 IN 3 IN 2 JUP 13 JUP 23... -
Page 19: 2) Jumper Default Positions Description
JUP21 and JUP22 short PIN2 and PIN3 to make the Input Port 1 and Input Port 2 be pulled to +5V position JUP11 and JUP12 short PIN2 and PIN3 to get MTD1000 to be ready of RS232 flow control function. -
Page 20: Firmware Downloading
4. Firmware Downloading 4.1 TR-800 GSM/GPRS Module Firmware Downloader There is NO need to perform the firmware download for the MTD1000 unit (unless requested by Daviscomms). The MTD1000 is already loaded with the latest firmware. However if require the follow steps in this section will show you how the process is being carried out. - Page 21 500151R04 DAVISCOMMS (S) PTE LTD Key in COM port number TR-800 PROGRAMMER Step 1: Enter your COM Port number. The default value is 1. The programmer will set the COM port to the following settings: COM Port Baud Rate = 115200 bps...
- Page 22 500151R04 DAVISCOMMS (S) PTE LTD Browser firmware file Click to begin programming Step 3: Click the “Download Target File” button to begin programming. Step 4: A new console window will be displayed as below: Step 5: Totally power off the Product and re-Power it up.
- Page 23 500151R04 DAVISCOMMS (S) PTE LTD Step 6: The flashing process will run automatically. Wait for the process to be completed. Note: Do not remove the module, power off the Product or close the TR-800 Programmer software during this period. Doing so might cause unforeseen damage to the module.
-
Page 24: Terminology
Short Messaging System, service for sending short text messages to mobile phones 5.6 Hyper-terminal Hyper-terminal is a terminal emulation program that comes standard with every PC running Windows 95/98, Windows 2000 or NT. Hyper-terminal allows you to configure the MTD1000 unit through the serial port on the PC. 23 of 23...