Wall Mounting The Ultra-Range Charger - Uniden DRX402 User Manual

4. Continue walking away from the base. Make a note
where the signal strength icon drops from 3 bars to 2 or
if you start to hear noise on the line (which indicates the
signal is getting weaker).
5. Place the charger anywhere inside the range where the
signal strength icon showed 3 bars and the handset had
a clear signal with no noise.
Testing the location
Connect the charger's AC adapter and make sure the
light comes on steadily. If the light flashes, the Ultra-Range
charger is not getting a good signal from the base. The
charger may be too far away from the base, there may be
interference from electronic devices, or the signal might
be blocked by thick walls or metal objects. Try moving the
charger to another location.

Wall Mounting the Ultra-Range charger

If you want mount the charger on the wall, you need to adjust
the desk stand:
1. Pull the locking tab
up and back (see
the black arrow in
the illustration to the
right), and slide the
desk stand straight
off.
2. Flip the stand over
so the locking tabs
that say are
WALL
facing the charger
with the arrows pointing down.
LINK
9