Tools; Voice Commands - Pantech J-TOUCH User Manual

next setting.
• MENU LAYOUT: Select Grid or Shortcuts, then tap
• MENU TYPE: Select Multimedia, Personalize, Messaging,
then tap Exit. or tap Skip to go to the next setting.
• CLOCk FORMAT: Select Analog, Large
Digital 24 or Off, then tap Exit or tap

TOOLS

VOICE COMMANDS

Your phone is equipped with an Advanced Voice Commands (AVC) feature. This feature
allows you to make calls or use the phone' s functions by simply using your voice. All
you have to do is talk into the phone and then the phone will recognize your voice and
complete tasks by itself.
1. To access Voice Commands from idle mode, slide the phone up, tap Tools, and
Voice Commands.
2. The phone displays the Voice Commands menu and prompts you to say the
name of the command you want to use. To complete your task, simply follow
the voice prompts. You can speak the name of the command after you hear
a beep.
3. Select one of the following options.
Call <Name or #> / Send <MSG Type>
<Item> Contact <Name>
/
Verizon / Help
To view information about each option, tap Info. Tap
Commands Settings. Please refer to
Settings.
4. When it recognizes one of these commands, the phone launches the associated
application. If the phone does not hear a command within approximately eight
seconds, AVC mode will turn itself off.
82
Exit or tap Skip to go to the next setting.
Productivity or Communicator,
Analog, Digital 12, Large Digital 12, Digital
Skip to complete set-up.
/ Go To <Shortcut> / Check
Search Redial Play <Playlist> My
/ / / /
Settings to access Voice
page xx for more details on Voice Commands
CALL <NAME OR #>
Use the Call command to voice dial a name from your Contact List or a phone number.
When dialing a number, pronounce each digit, but do not pause noticeably between
the digits.
24, Large
1. You will hear
displayed.
2. If calling a contact from your Contact List, say Call <Name>. Your phone will
ask you to confirm the name you said. Say "Yes" if it was repeated correctly.
That phone number will be dialed. If there is more than one number saved for
that contact, you will be asked to confirm which number to dial.
Examples: Call John Work
CALL <MSG TYPE>
Use the Send command to send a text or other type of message to a specified name
or number.
1. You will hear
displayed.
2. Say "Send" followed immediately by Text, Picture, Video or Voice Message.
Examples: Send text message to Bob
GO TO <SHORTCUT>
Use the Go To command to open an application on your phone. You can say
by itself and be prompted to say the application name, or you can skip the prompt by
saying "Go
1. You will hear
displayed.
2. To access a menu within the phone, say
Examples: "Go To Calendar". If no menu option is stated, a list of options will
be provided.
Please say a command and the Voice Commands menu will be
Please say a command and the Voice Commands menu will be
To" followed by the application name.
Please say a command and the Voice Commands menu will be
"Go To" followed by the menu.
•TOOLS
01
02
03
04
05
06
07
"Go To"
83