Pantech J-TOUCH User Manual page 37

CURRENT COUNTRY
Allows you to set the country of your current location so that your phone works
properly while you travel.
1. In the Home screen, tap Setting,
2. Select the desired country.
Tap Help to view the help for the
SECURITY
The Security menu allows you to electronically secure the phone.
The default lock code is the last 4 digits of your phone number.
EDIT CODES
To set a new lock code:
1. In the Home screen, tap Settings,
2. Enter the four-digit lock code.
3. Tap Edit Codes.
4. Select one of the following settings.
Phone Only:
• Allows you to edit the lock code for Security. (The default lock code is the
last 4 digits of your phone number.)
• Calls & Services: Allows you to edit the lock code for Restrictions. (The default lock code
is the last 4 digits of your phone number.)
5. If Phone Only is selected, enter the new four-digit code in the
Security Code field. Enter the new four-digit code again in the
New Code
field to confirm your input.
6. If Calls & Services is selected, enter the current lock code in the
& Services Code field. Enter the new four-digit code in the
& Services Code
field. Enter the new four-digit code again in the
New Code field.
72
Phone Settings, Current Country.
Current Country.
Phone Settings, Security.
Enter New
Re-enter
Enter Calls
Enter New Calls
Re-enter
RESTRICTIONS
Use the following procedure to configure Location Setting, Calls and Messages
restrictions.
1. In the Home screen, tap Settings, Phone
2. Enter the four-digit lock code. The default lock code is the last 4 digits of your
phone number.
3. Tap Restrictions.
4. Select one of the following settings:
• Location Setting: Unlock Setting/Lock Setting.
• Calls: Incoming Calls/Outgoing Calls.
For Incoming Calls, select Allow All, Contacts Only
For Outgoing Calls, select Allow All, Contacts Only
• Messages: Incoming Messages/Outgoing Messages.
For Incoming Messages, select Allow All
For Outgoing Messages, select Allow All or
• Dial-Up Modem: Allow/Block.
PHONE LOCK SETTING
This setting specifies whether the phone should be locked whenever it is turned on.
Lock Mode prevents the unauthorized use of your phone. Once the phone is locked,
it is in restricted mode until the lock code is entered. You can still make emergency
calls.
1. In the Home screen, tap Settings, Phone
2. Enter the four-digit lock code. The default lock code is the last 4 digits of your
phone number.
3. Tap Phone Lock Setting.
4. Select one of the following settings.
Unlocked:
• Phone is unlocked.
• On Power Up: Phone will lock when it is turned on.
•SETTINGS
Settings, Security.
or Block All.
or Block All.
or Block All.
Block All.
Settings, Security.
01
02
03
04
05
06
07
73