Usb Sound Card; Playback; Mac Os X - Teufel Cinebar One User Manual

USB Sound Card

With Windows 7, 8 and 10 as well as
Mac OS X 10.5 and higher, no special
driver software is required to operate
the Cinebar One. The operating
systems detect the Cinebar One as a
"USB Advanced Audio Device" when
it is connected to the USB port.

Playback

For playback via the sound card,
select Bluetooth
the button (21), but do not acti-
vate the Bluetooth
external player (e.g. smartphone).
This will activate playback via the
sound card function.
You only adjust the volume of the
amplifier on the Cinebar One, all
other settings are controlled from
your PC.

Mac OS X

To quickly switch playback to the
Cinebar One, push the [alt] button on
the Mac and
click the
speaker icon on
the menu bar
(you can enable
this icon under
"Sound" in the
system prefer-
ences, see
below).
®
as the source with
®
function on your
Select the "Teufel Cinebar One" from
the list under "Output device". All
Mac sounds will now be played back
via the Cinebar One.
"Sound" system preference
In the "Sound" system preference,
you can select the Cinebar One as the
playback device on the "Output" tab:
Click "Teufel Cinebar One" in the list.
All Mac sounds will now be played
back via the Cinebar One.
If you check "Display volume on the
menu bar" at the very bottom, you
can also access the menu described
above via the speaker icon.
Further sound settings depend on
the programme in use, e.g. iTunes or
Facetime.
• Cinebar One 19