Jacuzzi Z100 Owner's Manual page 4

The Model Z100 Whirlpool Spa
The Model Z100 is a portable whirlpool spa that comes
complete with integrated electric heater, filter, skimmer,
and whirlpool system. The 64" X 70" spa includes a factory
installed redwood shirt and a spa cover to protect the spa
from debris and reduce heat loss. Foam insulation is
factory-installed around the spa shell to ensure better heat
retention.
The Model Z100 features two-level seating for four
people. Four strategically located jets are directionally
adjustable and provide superb hydromassage performance.
Two knobs conveniently located on the rim of the spa give
you control over the Silent Air Induction system. A four
position switch controls heating and filtration, activates the
whirlpool, and turns the unit off. The water temperature is
regulated by an adjustable thermostat located on the
heater assembly. Made of sun- and weather-resistant
acrylic/FRP, the spa shell will retain its lustrous color for
years.
Compact and portable, the spa is easy to install. It
requires a 115 VAC 20 AMP grounded, separate circuit and
is equipped with a Ground Fault Circuit Interrupter (GFCI)
incorporated onto the cord. The equipment is mounted
within the perimeter of the shell.
SPECIFICATIONS
DIMENSIONS MOTOR/PUMP
2.0 HP 2 speed
64" (162.5 cm) W
115 VAC
70" (177.8 cm) L
1725/3450 RPM
28" ( 71.1 cm) H
Single Phase
60 Hz
Product specifications are subject to change without notice.
2
Installation Instructions
TOTAL
WEIGHT
2365 lb
(1075 kg)
TOP VIEW
70"
FRONT VIEW
28"
SERIAL NUMBER LOCATION
OPERATING
SHIPPING
GALLONAGE
WEIGHT
170 U.S. gal
509 lb
(643 liters)
(231 kg)
64"
ELECTRICAL
REQUIREMENTS
115 VAC
20 AMP
60 Hz
Requires dedicated
separate circuit