Table of Contents
Advertisement
SAFETY INFORMATION
Precautions
Battery Charging Precautions
The Rapport ill has a built-in Lithium
Polymer Battery. It can be recharged
using a DC12V power adapter with an
output of 1.2A or above and reaches
its full charge after a period in excess
of 6 hours. After the battery has been
fully charged for the first 2-3 charging
cycles, it can be used for
approximately 6 hours (up to a Max.8
hrs in normal operation).
The battery can be recharged by
connecting it to the DC adapter,
regardless of OSD power, when the
slider switch has been turned on.
The discharge operation starts when the Main Switch is turned on and it then
consumes power from the battery. Therefore, when the Rapport ill is not being
used for a period of time, make sure the Main Switch is turned off.
08
Precautions
Battery Handling
■
Avoid short circuits, as this will cause internal damage to the battery.
■
The soft packaging can easily be damaged by contact with sharp surfaces
or objects, take care when handling or storing.
■
The sealed edge adjacent to the battery contacts is a very sensitive area;
take care not to bend or fold the edges.
■
Do not open the folded edges.
■
Do not bend the tabs are these are breakable.
■
Avoid mechanical shocks to the battery.
■
Do not immerse the battery in water.
■
Only use the supplied battery charger or one with a safety guarantee.
■
Stop charging immediately if the battery is overheating, emitting a burning
smell, changed in colour or distorted.
■
Keep away from static electronic fields while using, charging or when
storing.
■
Do not disassemble; the battery is not a serviceable item.
■
Never short circuit the positive and negative poles of the battery.
■
Do not charge the battery in ambient temperatures above 40°C/104°F
SAFETY INFORMATION
09
Advertisement
Table of Contents
