Using The Dc3; Record Video - Uniden iWitness DC3 Owner's Manual

5. Press REC/OK to select that character and move to
the next position. Continue selecting characters.
6. Press REC/OK after you complete the entry. Press
MODE to go to the next mode when the entry is
complete.
7. The identifier displays after the date/time stamp
when the video is played back.
To change a character: Press REC/OK repeatedly to
cycle through the characters to reach the character
to change. Change the character using ► or ◄ and
then press REC/OK to move to the next character.
Press MODE to go to the next mode when the entry is
complete.
To remove a character: Press REC/OK repeatedly to
cycle through the characters to reach the character to
delete. Select a blank character and press REC/OK.
You will now have a blank character in that spot. Change
the character using ► or ◄ and then press REC/OK to
select the new character. Press MODE to go to the next
mode when the entry is complete.

USING THE DC3

RECORD VIDEO

When connected to a car charger, the camera
automatically goes into Record mode and starts
recording when you start the car. The
on the screen with a flashing red dot beside it to indicate
18
Default = UNIDEN
icon displays