Fluke 8842A Instruction Manual page 24

GENERAL
COMMON MODE VOLTAGE..................1000V dc or peak ac, or 700V rms ac from any input to earth.
TEMPREATURE RANGE .......................0 to 50°C operating, -40 to 70°C storage.
HUMIDITY RANGE .................................80% RH from 0 to 35°C, 70% to 50°C.
WARMUP TIME ......................................1 hour to rated specifications.
POWER ..................................................100, 120, 220, or 240V ac ±10% (250V ac maximum), switch
VIBRATION.............................................Meets requirements of MIL-T- 28800C for Type III, Class 3,
PROTECTION ........................................ANSI C39.5 AND IEC 348, Class I.
SIZE........................................................8.9 cm high, 21.6 cm wide, 37.1 cm deep(3.47 in high, 8.5 in
WEIGHT..................................................Net, 3.4 kg (7.5 lb); shipping, 5.0 kg (11 lb).
INCLUDED..............................................Line cord, test leads, Instruction/Service Manual, IEEE-488
IEEE-488 INTERFACE FUNTION ..........Option allows complete control and data output capability, and
ELECTROMAGNETIC COMPATIBILITY Specifications apply when used in an environment with fields
selectable at rear panel. 50, 60, or 400 Hz, automatically
sensed at power-up. 20 VA maximum.
Style E equipment.
wide, 14.6 in deep).
Quick Reference Guide, (Option –05 only), and instrument
performance record.
supports the following interface funtion subsets: SH1,AH1, T5,
L4, SR1, RL1, DC1, DT1, E1, PP0, AND C0.
strengths ≤ 1 V/m, (0.8 V/m for DC Current.) For fields
strengths up to 3 V/m, multiply floor adder by 12 for VDC and
Resistance and 200 for DC current. VAC and AC Current have
no adders up to 3 V/m.
Figure 1-1. External Dimensions
Introduction and Specifications
SPECIFICATIONS
f1-01.wmf
1
1-11