Operating Principals; Specifications - Hover-1 CRUZE Operation Manual

OPERATING PRINCIPALS

The Cruze uses a sensor that drives the motor that is located within the
wheel. Before riding, the user must select Standard Mode or
Acceleration Mode by pressing the Mode Button on the right side of
the skateboard as shown in FEATURES/PARTS. Next, the Cruze must first
be set in motion manually, then activate the motor by covering the
foot pad sensor with your back foot. Once the motor has been
activated, the user will be able to ride using the selected mode.
Model:
Net Weight:
Max Supported Weight:
Max Speed:
Max Distance Range:
Minimum Turning Radius:
Battery Type:
Motor Power:
Battery Voltage:
Battery Capacity:
Power Requirement:
Product Dimension:
Product Weight:
Profile:
Board Size:
Axle:
Wheel Size:
WARNING
Any Cruze that does not work properly
can cause you to lose control and fall.
Inspect the entire device thoroughly
before every ride, and do not ride it until
any problems have been corrected.

SPECIFICATIONS

HY-HSK
8.38 lbs (3.8 kg)
198 lbs (90 kg)
Up to 11.18 mph (17.99 km/h)
Up to 5 miles (8 km)
0°
Lithium-ion
150W Brushless Motor
25.55 V
2.15 Ah
AC 100-240V, 50-60 Hz
27.56 in. x 8.66 in. x 4.53 in.
8.38 lbs
High
27.6 in. x 8.07 in.
8.27 in
2.5 in (70mm)
6