Charging The Device; Battery Care / Maintenance - Hover-1 CRUZE Operation Manual

CHARGING YOUR CRUZE

CHARGING THE DEVICE

• Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris or dirt inside the port.
• Plug the charger into a grounded wall outlet.
• Connect the cable with the power supply (100V ~ 240V; 50, 60 Hz).
• Ensure the light on the charger is lit GREEN.
• Align and connect the 3-pin charging cable into the charging port
of the Cruze. DO NOT FORCE THE CHARGER INTO THE CHARGE PORT,
AS THIS MAY CAUSE THE PRONGS TO BREAK OFF OR CAUSE
PERMANENT DAMAGE TO THE CHARGE PORT.
• The charging indicator light should change to RED, indicating that
your device is now being charged.
• When the RED indicator light on your charger turns to GREEN, then
your device is fully charged.
• A full charge may take up to 2.5 hours.
• After fully charging your Cruze, unplug the charger from your
device and from the power outlet.

BATTERY CARE / MAINTENANCE

BATTERY SPECIFICATIONS
Battery Type: Rechargeable lithium-ion battery
Charge Time: Up to 2.5 hours
Voltage: 25.9 V
Initial Capacity: 2.15 AH
Working Temperature: 32°F - 113°F
Charging Temperature: 50°F - 77°F
Storage Time: 1 year
Storage Temperature: -4°F - 122°F
Storage Humidity: 5% - 95%
BATTERY MAINTENANCE
The lithium-ion battery is built into the device. Do not disassemble the
device to remove the battery or attempt to separate it from the
device.
• The Cruze can be stored at full power for approximately 3 months.
If not In use, it is recommended that you recharge the battery once
a month to maintain battery life.
• Use only the charger and charging cable supplied by Hover-1. Use
of any other charger or cable may lead to damage to the product,
overheating and risk of fire. Use of any other charger or cable voids
15