Riding Modes - Hover-1 CRUZE Operation Manual

FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS
CAN AND MAY LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR
MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE
SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.
OPERATING YOUR DEVICE
Make sure the device is fully charged before the first initial use. Before
turning on your Cruze, ride it like a normal skateboard to get
comfortable with the board style.
When comfortable with the board, turn on your Cruze. For the
power-assisted motor to activate, you must start riding, then place
your back foot on the board sensor so it's covering at least 5 orange
circles. The motor will maintain your current speed until you lift your
foot off the sensor. To go faster, you will need to push the ground
manually.
Cruze is equipped with a built-in 150 Watt Brushless Motor which
allows you remain in cruise control (up to 11.18 mph).

RIDING MODES

When the Cruze is powered on, it will be in Cruising Mode by default.
Press the Mode Button to alternate between modes.
A. Cruising Mode - While Cruising you will need to stop manually using
your feet.
B. Braking Mode – While cruising, lift foot off sensor for 1.5 seconds and
the Cruze motor will apply brakes to slow you down gradually.
Look at the Mode indicator light, if it's on then it's in Cruising Mode. If
flashing quickly then it's in Braking Mode.
WEIGHT AND SPEED LIMITATIONS
Speed and weight limits are set for your own safety. Please do not
exceed the limits listed here in the manual.
• Maximum Weight: 198 lbs
• Minimum Weight: 44 lbs
• Maximum Speed: Up to 11.18 mph
RIDING YOUR CRUZE
WARNING
Overweight exertion on the device may
increase possibility of injury or product damage.
13