Safety Instructions; Connectors; Inputs; Pre Out (Line Output) - Pro-Ject Audio Systems Pre Box S2 Analogue Instructions For Use

Table of Contents

Dear music lover,

thank you for purchasing a preamplifier from Pro-Ject Audio Systems.

In order to achieve maximum performance and reliability you should study these instructions for use carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the

voltage in your area meets the voltage requirements printed on the power supply.

The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily

accessible at all times. Never handle the device, the power supply while your hands are wet or damp.

Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such

as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never

place any naked flame sources, such as lighted candles on or near the device. The product shall not be used

in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.

Make all connections whilst the amplifier is disconnected from the power supply.

Take care to connect the left and right channels correctly. The right channel is usually marked red, the

left channel black or white.

Never use any other power supply than the one supplied with the unit.

Line level sources such as CD player radio or TV can be connected to the input RCA sockets marked In1, In2

and also to the stereo 3.5mm jack socket In3.

A power amplifier or active loudspeakers can be connected to the output sockets marked Out.

Fix Output connects an analogue record device or a Pro-Ject Head Box headphone amplifier.

Table of Contents

Do you have a question about the Pre Box S2 Analogue and is the answer not in the manual?