Table of Contents
Advertisement
Operation
When power is applied to the camera, the Roughneck V910 views the selected scene.
Maintenance
The Roughneck V910 Impact-Resistant Cameras require no scheduled maintenance except for the
occasional cleaning of the lower dome.
Care and Cleaning of Lower Dome
The inside surface of the smoked (gray-tinted) dome is easily scratched. Take the following precautions to
maintain the dome's surface.
1. Always handle the dome by the flange and avoid touching the inside surface.
2. If dust or other contaminants accumulate in the dome's interior, they should be removed with clean dry air
pressure (compressed air cans).
3. If spots, streaks or stains appear on the interior or exterior, they can be removed with a solution of 50%
isopropyl alcohol and 50% water using a microwave-safe (aluminum free) paper towel. Dry with clean, dry
pressurized air.
4. Scratches or surface blemishes on the exterior or interior may be removed with a nonabrasive wax using
a soft cleaning cloth. Either liquid or spray cleaner/wax suitable for fine furniture is acceptable.
Caution: Excessive pressure or rubbing on the dome's surface can cause permanent scratches that may
render the dome unusable.
5. Clean all surfaces with any soft cleaning cloth and a solution of Ivory soap as a cleaning agent.
Caution: For warranty protection, implement this instruction exactly as stated.
XX137-60-00 Rev 109 Roughneck V910 Dome Cameras with WDR
6BOperation • 11
Advertisement
Table of Contents
