Preparations For Riding - Whyte ES-140 SCR Supplementary Service Manual

3.0: PREPARATIONS FOR RIDING

3.1: MAKING ADJUSTMENTS
Please refer to the specific component manufactur-
ers manual or published technical information about
adjusting the components on your Whyte bike. In-
structions may be downloaded from the relevant
manufacturer's internet site, as shown in the table to
the right.
This electric range of bikes are fitted with either the
Shimano Steps SWE6000 for the Road/Path range or
the Brose Motor to the hard tail MTB range or Bosch
motor for the Full Suspension MTB range.
Shimano publish comprehensive instructions for
these products, which are available from the http://
si.shimano.com website, under the E-Bike section on
that webpage. Reference the table for the appropriate
manuals. In particular, in the User Manual there are in-
structions on how to operate the system, whilst in the
Dealer Manual, the section titled "Installation" has instruc-
tions on how to install the motor, battery, display, etc.
If you are uncertain in any way, about making adjustments
to any components on you Whyte bike, then DO NOT RIDE YOUR BIKE. Contact your Whyte dealer
who will be able to advise you on how to go about setting up you Whyte for riding, and or making
adjustments to the components fitted to your Whyte.
3.2: WHYTE GETTA-GRIP SEAT CLAMP (e-800 only)
The Getta Grip seat clamp design is a patented design to allow adjustment of the saddle height by
either the use of a Quick Release (QR) Lever, or bolt-up method. This manual covers both styles of
clamps.
Item:
1
2
3 Whyte Main Frame Seat Tube
4
5 M6 x 25mm Long Fastener
6
2019 Edition 1
WHYTE Service Manual
Description
Whyte Seat Clamp Band
T-Pad
Adjuster Nut
M6 Washer
Brose Motor www.brose-ebike.com/en/
Bosch www.bosch-ebike.com/en/
DT
www.dtswiss.com
Ergon www.ergon-bike.com
FSA www.fullspeedahead.com
Jagwire
www.jagwireusa.com
Shimano
www.shimano.com
SR Suntour www.srsuntour-cycling.com
Tektro www.tektro.com
Vittoria
www.vittoria.com
VP www.vpcomponents.com
Series
User Manual
Dealer Manual
Fig.2: Getta-Grip Seat Clamp: Bolt-up
SWE6000
UM-70H0A-002
DM-SP0001-03
Page 9