Related Manuals for Whyte ES-140 SCR
Summary of Contents for Whyte ES-140 SCR
- Page 1 E-bike Range eS-140 SCR e-900 e-800 eC-7 Coniston Men’s & Coniston Women’s eR-7 Clifton & Highgate Compact Supplementary Service Manual 2019 Edition 1...
- Page 2 Page 2 2019 Edition 1...
-
Page 3: Table Of Contents
Set up of Fork Set up of Rear Damper (eS-140 only) Battery maintenance Safety Lubrication: 5.1 Whyte Getta Grip Seat Clamp (e-800 only) 5.1.1 Bolt-Up Style 5.1.2 Quick Release Style 5.2 Whyte Inter-Grip Seat Clamp (eS-140 & e-900 only) 5.3 General Lubrication Servicing the Rear Suspension (eS-140 only) Chain-stay removal &... -
Page 4: Introduction
Bundled with this manual, are the respective manufacturers instructions and manuals for the branded parts that are fitted to your Whyte bike. Please take time to study all the rele- vant instruction manuals to ensure you have a continually safe and well set-up bike before every ride, and to help you build up a relationship of knowledge between you and your Whyte Dealer. -
Page 5: Geometry
WHYTE Service Manual 2.0: GEOMETRY Fig.1: Geometry 2.01: WHYTE eS-140 SCR Frame Size Small Medium Large 66.0° 66.0° 66.0° Head Angle Seat Angle** 74.8° 75.0° 75.2° Top Tube 600mm 620mm 641mm BB Height* 320mm 320mm 320mm Stand Over 792mm 776mm... -
Page 6: E-900
WHYTE Service Manual 2.02: WHYTE e-900 Frame Size Small Medium Large Extra-Large Head Angle 65° 65° 65° 65° Seat Angle 74.0° 74.0° 74.0° 74.0° Top Tube 580mm 627mm 645mm 664mm BB Height* 304.0mm 304.0mm 304.0mm 304.0mm Stand Over 800mm 820mm... -
Page 7: Coniston Men's
WHYTE Service Manual 2.02: WHYTE Coniston Men’s Frame Size Small Medium Large Head Angle 69.5° 70.0° 70.0° 74.0° 73.5° 73.0° Seat Angle Top Tube 591mm 617.6mm 637.8mm BB Height* 288mm 288mm 288mm Stand Over 767mm 821mm 825mm Wheel Base 1107mm... -
Page 8: Clifton
450mm 450mm 450mm 450mm Seat Post Ø 27.2mm 27.2mm 27.2mm 27.2mm Note: * BB height with Ø716mm tyres fitted (700C x 28mm / 30-622) 2.05: WHYTE Highgate Compact Frame Size Small Medium Large Extra Large Head Angle 70.0° 70.0° 70.0°... -
Page 9: Preparations For Riding
Whyte bike, then DO NOT RIDE YOUR BIKE. Contact your Whyte dealer who will be able to advise you on how to go about setting up you Whyte for riding, and or making adjustments to the components fitted to your Whyte. - Page 10 Seat Post. Seat Clamp Service 3.3 Inter-Grip Refer to the 2018 Whyte MTB Full Suspension Range Supplementary Service Manual, section 8.0, for instructions on how to service the Inter-Grip seat clamp system. This User Manual may be following website: http://www.whyte.bike/support.
-
Page 11: Set Up Of Rear Damper (Es-140 Only
Good Quality Shock Pump. Small Ruler Your Whyte bike is fitted with an air spring rear shock absorber. This means that the air pressure in the shock absorber determines the spring rate. The correct ‘sag’ can be found using the sliding ‘O’ ring fitted to the shaft of the shock piston. Slide the ‘O’ ring against the shock body. -
Page 12: Battery Maintenance
Always stop riding when making adjustments of any kind to the bicycle! Platform Damping Adjustment. The rear Shock fitted to your Whyte bike may have a “platform” facility to adjust the slow speed compression damping, eg Fox “3pos w/Adj” or SRAM RockShox “Motion Control”. -
Page 13: Safety
Safety Standard, for typical cross-country mountain biking use. It has not been designed or tested for free-ride or extreme down-hilling. The bicycles in the Whyte eC-7 & eR-7 series’ have all been designed, tested and comply with ISO 4210-2 Safety Standard, for typical road or path cycling use. They have not been de- signed or tested for mountain biking or for use in competition. -
Page 14: Lubrication
WHYTE Service Manual 5.0: LUBRICATION 5.1: WHYTE GETTA-GRIP SEAT CLAMP 5.1.1: Bolt-Up Style. Fig.4 Fig. 4: Bolt-Up Lubrication Lubrication Point Description Lubricant Interval Castrol LM M6 x 25mm Once a Fastener Month equivalent 5.1.2: Quick Release Style. Figure 5 Figure 5: QR Lubrication... -
Page 15: General Lubrication
Line Teflon White Lithium Complex grease 5.3: GENERAL LUBRICATION For the correct lubrication regime and maintenance of all parts on a Whyte bicycle, please refer to the specific component manufacturers detailed instructions bundled with this man- ual or for further information visit the specific manufacturers website. -
Page 16: Servicing The Rear Suspension (Es-140 Only
16.1 Nm (Min) - 19.9 Nm (Max), 11.9 lbf/ft (Min) - 14.7 lbf/ft (Max). To service the remainder of the rear suspension, please refer to the instructions detailed in section 6.0 of the Whyte 2019 MTB Full suspension supplementary manual, available from the following website: http://www.whyte.bike/support 7.0: TORQUE SETTINGS... -
Page 17: Owners' Notes
WHYTE Service Manual 8.0: OWNERS’ NOTES 2019 Edition 1 Page 17... - Page 18 WHYTE Service Manual 8.0: OWNERS’ NOTES CONTINUED Page 18 2019 Edition 1...
-
Page 19: Edition 1 Page 3
WHYTE Service Manual 8.0: OWNERS’ NOTES CONTINUED 2019 Edition 1 Page 19...