Table of Contents
Advertisement
AMPLIFIER DESCRIPTION
La-115S plus A Amplifier
1) AC INPUT:
AC 195V – 250 V 50Hz – 60 Hz 1,6 A
PowerCon connector mod. NAC3MPA-1.
Use only the right cable.
2) LINK AC
PowerCon connector mod. NAC3MPB-1
3) INPUT:
XLR-3 Input connector
1 = Ground
2 = + Signal
3 = - Signal
4) SIGNAL LINK:
Output signal XLR3 connector provides a
link for the input signal to link several
units with the same audio signal.
5) GAIN:
Gain level potentiometer.
6) LIMIT:
Red LED indicates amp limiting.
7) TEMPERATURA:
Red LED indicates amplifier has reached
the maximum temperature. The system
will stop working until the temperature
decreases.
8) SIGNAL:
Green LED indicates signal presence.
9) READY:
Green LED Indicates unit is on and working properly.
Voltage selection and fuse: La-115S plus A
9
Advertisement
Table of Contents
