Advertisement
RANDOM function shuffles the tracks, so you will listen to the songs not in the original order.
REPEAT function allows you to repeat the playlist playing.
AF function allows you to automatically select the alternative frequency for your IPLUGRDS TX
(see page 5).
IPOD SEL function allows you to select your IPOD right generation.
EXIT, allows you to exit from the menu.
SW VERS allows you to identify your IPLUGRDS TX software version.
A long press on the left side-key controls the functions FIRST, ROOT, PLAYLIST, EXIT (from the
menu).
<<
>>
ROOT
RDM
SRC
Once entered in the menu, to scroll the functions just press quickly the key >> (right).
To confirm a selection press SRC key.
<<
>>
ROOT
RDM
SRC
FIRST
Once selected the function needed, it's possible to scroll each information and each step will be
visualized on the radio display.
FIRST function selects the first track of the playlist playing.
ROOT function selects the first track of the first playlist.
PLAYLIST function allows you to select playlists (group of tracks created by the user)
pre-loaded into the IPOD.
FIRST
EXIT
PLAYLIST
ROOT
<<
>>
RDM
ROOT
SRC
The handling of the pre-emphasis is instead referred to the standard of transmission which the
different countries adopt; in Europe, the transmission is at 50uS, in other countries, such as USA
it is at 75uS. To set the IPLUGRDS TX at 75uS, place pin 5 ON.
With some radios, IPLUGRDS TX audio can result imperfect because of the common aerial
masses.
Therefore it is possible to separate these by excluding the jumper as described below.
Pag 12
Pag 5
SPECIAL SETTINGS
ON
ON
ATTENTION:
BEFORE OPEN IPLUGRDS TX TO CARRY OUT ANY KIND OF CONFIGURA-
TION, PLEASE DISCONNECT ALL HARNESSES AND
CONNECTED SOURCES
OFF
6
5
4
3
2
1
OFF
6
5
4
3
2
1
Advertisement
