Advertisement
TROUBLESHOOTING
The radio band on default is disturbed.
Select an available frequency between those described in the
FREQUENCY SELECTION on page 4.
When the player is paused, an annoying noise appears on
loudspeakers.
Separate audio masses excluding the jumper on your IPLUGRDS TX
circuit as described in the picture below.
When the radio is turned off, the player does not switch off.
Verify the correct connection of the PINK cable to the positive ignition.
By changing the frequency trough AF function, the radio does not tune
to the new frequency.
Press the key where the station is memorized, some radios have low
receptivity to the AF function.
The audio has distortion or is too low.
Activate the "SOUND CHECK on IPOD", if the trouble it's not solved,
please download mp3Gain software from Paser web site
(www.paser.it) to level audio of the file. For AUX IN profile, adjust the
volume from the device.
ATTENTION:
For new IPOD 6th generation Paser ensures the possibility to control it directly from the
IPOD keypad only if the software version is PC 1.0.2
To verify the software version on your iPod:
ON
OFF
6
5
4
3
2
1
MENU
SETTING
INFO
With the radio (or the ignition) switched on, IPLUGRDS TX will turn ON automatically.
Now it is possible to connect the devices to the available inputs (IPOD, AUX IN).
If we switched OFF the unit with the remote, to restart the system just press one button of the
remote or connect the IPOD (with ignition and the radio ON).
AUX IN
Tune in to the FM
on the radio display. Now memorize the radio station to simplify future connections!
ATTENTION: BE SURE THAT THE RDS FUNCTION ON THE RADIO IS
ACTIVATED!
IPLUGRDS TX is designed to manage the audio files with an audio quality comparable to the CD
quality.
To obtain this, it is necessary to have high quality AUDIO files.
For IPOD, the audio levels with which the IPLUGRDS TX gives the best results, respects the
parameters chosen by APPLE, and in this way, perfect audio is obtained by recording your audio
CD with iTunes.
We suggest however to always SET ON the SOUND CHECK option.
For songs of a different origin, the quality is still good, even if a difference of volume can be found
between one file and another.
In the case of bad quality files, distortion can be found (if the volume of recording was too high),
or deep audio (if the volume of recording was too low) .
Pag 14
Pag 3
ACTIVATION AND TUNING
87.7
band frequency (default ), the title of the song playing will appear
87.7 mHz
AUDIO QUALITY
iPod
iPod
Music
>
Volume limit
Photos
>
BacklightTimer
Extra
>
Audiobooks
Settings
>
Compilations
Shuffle Songs
>
Sound Check
>
>
>
>
On
Advertisement
